Contents
PC
2.4 GHz Mode (Dongle)
- Plug the 2.4 GHz dongle into a USB port on your PC.

- Toggle the switch on the back of the controller to ON.

- If the controller is not already in Dongle / Wired XInput mode:
- Press and hold the 🔘 Logo button to open the on-screen menu.
- Select Mode Switch → XInput Dongle.
- The controller will switch to Dongle / Wired XInput mode and connect.

Bluetooth Mode
- Toggle the switch on the back of the controller to ON.

- If the controller is not already in Bluetooth XInput mode:
- Press and hold the 🔘 Logo button to open the on-screen menu.
- Select Mode Switch → XInput Bluetooth.
- The screen shows: "Bluetooth XInput — Pairing…"

- On your Windows PC, open the Bluetooth device list and select:
- Xbox Wireless Controller
Wired Mode (USB-C)
- Toggle the switch on the back of the controller to ON.

- Plug the USB-C cable into your PC.

- Once connected, both grips will rumble briefly for about 0.5 seconds to confirm.

Mobile (Bluetooth)
* The controller supports the following Bluetooth modes on mobile
Playing a native game? Choose: Xbox Wireless Controller
Playing a non-native game (requires key mapping)? Choose: Flydigi APEX6
XInput (Bluetooth)
- Toggle the switch on the back of the controller to ON.

- Press and hold the 🔘 Logo button to open the on-screen menu.
- Then select Mode Switch: XInput Bluetooth → the screen shows "Bluetooth XInput — Pairing…"

- In your phone's Bluetooth device list, select the matching device named Xbox Wireless Controller

FlashPlay
- Toggle the switch on the back of the controller to ON.
- Press and hold the 🔘 Logo button to open the on-screen menu.
- Then select Mode Switch: More → FlashPlay → the screen shows "FlashPlay — Pairing…"
- In your phone's Bluetooth device list, select the matching device named Flydigi Apex 6/6 Pro
- After connected, you can follow this way to manage the mapping settings: https://www.yuque.com/wuzhuoran/mlwzkd/gygnbxh5icfef0pb
Nintendo Switch
Wireless Connection
- Toggle the switch on the back of the controller to ON.

- If the controller is not already in Switch mode:
- Press and hold the 🔘 Logo button to open the on-screen menu.
- Select Mode Switch → Switch.
- The screen shows: "Switch — Pairing…"

- On the Switch home menu, go to Controllers → Change Grip / Order and wait for the Switch to detect the controller.

Wired Connection
- Toggle the switch on the back of the controller to ON.

- If the controller is not already in Switch mode:
- Press and hold the 🔘 Logo button to open the on-screen menu.
- Select Mode Switch → Switch.
- The screen shows: "Switch — Pairing…"

- On the Switch, go to System Settings → Controllers and Sensors → turn on Pro Controller Wired Communication.

- Connect the controller to the Switch with the USB-C cable. You're ready to play.

Troubleshooting
Dongle won't connect / keeps disconnecting?
- Unplug the dongle.
- Reset the controller to the "Pairing…" state, then plug the dongle back in.
- To reset: Press and hold Fn + 🔘 Start for 3 seconds.
- The on-screen connection status will change from "Connecting…" to "Pairing…" when the reset is successful.

Bluetooth won't connect?
⚠️ If the controller was previously paired with another device, you must unpair it from that device first before resetting the controller.
- On your PC or host device, open Bluetooth settings.
- Find "Xbox Wireless Controller" in the device list.
- Select "Forget this device" (Windows) / "Delete device" (other platforms) to unpair the controller.
- Press and hold Fn + 🔘 Start for 3 seconds to clear the controller's pairing memory.
- The on-screen status will change from "Connecting…" to "Pairing…" when the reset is successful.
SteamInput&reWASD
Video tutorial
Basic settings
* If the controller has been detected with Xinput mode via cable or dongle, just run the "Allow Third - Party Applications to Take Over Mapping" service in the advanced settings of the Space Station. Then when you return to Steam or reWASD, you will see that the controller has been directly recognized, and you can play games through these 3rd services.
-
This function is designed to serve players who only want to use the Steaminput and reWASD software mapping services. Once this function is enabled, Flydigi's own controller service will be completely blocked. The remaining tasks, including key remapping, motion sensing, and other settings, need to be adjusted on the Steaminput or reWASD software by yourself.
-
Make sure that the firmware and the Space Station have been updated to the latest.
-
Please remember that Flydigi service cannot work with 3rd mapping services. Once this function is enabled, the space station will give you the notification that Flydigi's service can not work at the same time.
-
Regarding the reWASD's support, check out here. https://www.rewasd.com/releases/release-9.3.0

-
All problems you encounter on Steaminput (reWASD) need to be answered by the official personnel of these two third - party services because they are following up and adapting the relevant services. So, if you have problems in this regard, please give feedback to the Steam or reWASD official via email or relevant communities.

FAQ
*The motion sensing drift problem on Steaminput with Gyro. The method is quoted from the user ZAMHome in the Discord channel.
Tutorial:
The problem lies not in the game controller but in Steam (the settings cannot be saved). You need to manually change the values in the configuration file (highlighted in the screenshot): \ steamapps \ common \ Steam Controller Configs \ 35192180 \ config \ preferences_37d7 - 2501 - 218fd74.vdf. For example: The file and folder names may be different. Be sure to restart Steam after making changes.
*Be sure to restart Steam after making changes.
"antidrift_enabled_sw" "0" "gyro_stationary_noise_tolerance" "0.258640468120574951" "accelerometer_stationary_noise_tolerance" "2.38133883476257324"

How to Remove the Polling Rate Limit
*The method is quoted from the Bilibili Up: 手柄模飞玩家
Tutorial:
Playing Android simulator
*Apex 5 doesnt support Dinput mode,please play with Xinput mode.
-
Connect the controller with XInput mode via cable or dongle.
-
See, controller has been detected automatically. Now, you can manage the buttons with simulator's functions.
