Search...
Menu

FAQ

* Try a manual calibration. (Note: the triggers must be in Linear mode for calibration to work properly.)
  • Press and hold FN + RB + LB simultaneously for 3 seconds to enter Calibration Mode.
  • Fully press each trigger (LT and RT) 2 times.
  • Fully rotate each stick (LS and RS) 2 full circles.
  • Quick press FN + RB + LB to exit Calibration Mode.  

 

❓ Controller won't turn on

  • Make sure the switch on the back of the controller is set to ON.
  • When there's no external power and the battery is at 0%, the controller enters low-battery protection mode. You'll need to charge it to at least 10% before wireless functions can resume.
  • You can charge via the USB-C port or the charging dock.
  • Plugging in USB only charges and shows charging status — it does NOT auto-restore button / stick output or wireless connection. After charging, press the Logo button to wake it up, or power it back on. 

 

❓ How to charge

* The Apex 6 supports two charging methods:
  • Via the USB-C port on the controller.
  • Via the charging dock's contact pins. 

 

❓ Cannot connect / Bluetooth unstable / disconnects

Step 1 — Clear the previous connection
  • If using the dongle:
    • Unplug the dongle.
    • Reset the controller to the "Pairing…" state, then plug the dongle back in.
  • If using Bluetooth:
⚠️ If the controller was previously paired with another device, you must unpair it from that device first before resetting the controller.
    • On your PC or phone, open Bluetooth settings.
    • Find "Xbox Wireless Controller" in the device list.
    • Select "Forget this device" (Windows) / "Delete device" (other platforms) to unpair the controller.
Step 2 — Reset the controller's pairing memory
  • Press and hold Fn + 🔘 Select for 3 seconds to clear the controller's pairing information.
  • The on-screen connection status will change from "Connecting…" to "Pairing…" when the reset is successful. 

 

❓ Connected but the game doesn't respond

  • PC games → prefer XInput mode.
  • If the game or software requires DInput, use Bluetooth Flydigi DInput mode.
  • Nintendo Switch → use Switch mode.
  • Android → choose between Bluetooth XInput, Flydigi DInput, or FlashPlay, depending on what the game supports. 

 

❓ Haptic feedback not working

  • Check battery level. When the battery is below 20%, both grip motors and trigger motors stop outputting vibration.
  • Make sure the Engine is properly launched and up to date.
    • Look in the system tray (bottom-right corner) for the Engine program (icon: Flydigi / Feizhi Logo).
    • Make sure the version and configuration are up to date. You can uninstall and clear the configuration, then reinstall. (A config-repair feature will be added in a future update.)
  • Go to the X-Haptics page and verify that the active profile (Global or game-specific) is properly enabled.
  • FlashPlay and Bluetooth modes do NOT support vibration feedback, and only support a single controller connection (wired or via 2.4 GHz dongle).
  • If everything is set correctly but you still get no feedback, please contact the customer support of the store where you purchased the controller.

Previous
Updates & Maintenance
Last modified: 2026-11-04Powered by